www.hoxville.com
Tel +358 14 449 9920
Fax +358 14 449 9922
E-mail info(@)hoxville.com
Hoxville® OIL500 Oil Analyzer
Hoxville OIL500 is an outstanding solution to safeguard the usability and life cycle of lubrication and hydraulic oils. The continuous performance of the oil is ensured with Hoxville OIL500. The Analyzer is based on web technology and thus will connect to various systems easily.
The graphics and the performance index illustrate the state of the oil. Neural networks are utilized in harvesting the measurements and diagnosing the condition of the oil. Hoxville OIL500 Analyzer can be applied as a remote monitoring device cementing the service offering to the customer.
Hoxville OIL500 is a versatile oil analyzer for condition monitoring. It measures on-line several physical parameters linked to the quality of the oil. Based on the expert diagnosis it will estimate the usability and the aging of the oil. Hoxville OIL500 is connected via the Ethernet or optionally Modbus interface to the automation or monitoring system.
Hoxville OIL500 Analyzer is installed horizontally in the tank containing lubrication oil, hydraulic oil or gearbox oil. The installing to the pipeline is done via a side flow to the sample bin attached into the Analyzer. The Analyzer is fit for equipment manufacturers and after sales as well and its installation is fast and easy.
Benefits
- Easy installation and deployment
- Estimating the life cycle of oil
- Indicating the timing for the oil change
- Measuring on-line without the need for lab analyses
- Contains the remote access
- Alerting for the moisture risk
- Alerting for instant failures via the oil deterioration
- Creating opportunities to service business
Properties
Hoxville OIL500 Analyzer measures and saves following parameters with required or pre-set intervals:
- Dielectricity spectrum (1-200kHz)
- Loss factor spectrum (1-200kHz)
- Relative Humidity (0-100%)
- Conductivity (100-10000pS)
- Light Transmission (0-100%, RGB)
- Temperature (-40 - +100°C)
- Viscosity in proto testing 1-500cSt
- Density in proto testing 600-1000g/cm³
Technical properties:
- Operating Pressure max 16 bar
- Operating Temperature -25 - +85°C
- IP68 design
- Time trends for several years
- Saving several thousand measurement values
- Ethernet or Modbus interface
- Power Over Ethernet or 12-24 V voltage
Oil Analyzer is equipped with a sample bin, when installed in a piping. The oil foam and air will be eliminated before the measurement. The Analyzer will control the magnetic valve for the proper oil sampling cycle.
Downloads: